Castrol Tribol HM 943 Range (previously called Tribol 943 AW) (anti-wear) hydraulic and circulating oils were developed to meet the demands of the most severe hydraulic applications. These high performance, ashless (zinc-free),multi-service oils can extend service life for uninterrupted machine availability and production. The following performance characteristics are emphasized. Oxidation stability to significantly extend safe oil service life and to protect tight machine clearance from varnish or deposits. Antiwear protection to maintain crucial tolerance characteristics of advanced hydraulic systems and to protect gears and bearings in circulating systems. Corrosion resistance to give protection, exceeding normal industry standards, against damage from condensed atmospheric moisture.
Hydraulics - designed for the most sophisticated hydraulic operations, robots, and other NC machines, Tribol HM 943oils may be used in any industrial, marine, or mobile applications. Circulating systems - outstanding anti-wear properties make Tribol HM 943 AW oils ideal for multi-component systems including anti-friction and journal bearings and all types of gears except where manufacturers specify AGMA "EP" or Compounded gear oils. Compressors €“ Tribol HM 943/32 and Tribol HM 943/46 in centrifugal and flooded screw compressors can significantly extend oil service life compared with conventional petroleum compressor oils and ATF fluids. In fact, drain intervals approach the range of some synthetic fluids. Tribol 943 AW oils may also be used in reciprocating compressors if temperatures are not high and units are not prone to valve deposits. The wide array of Tribol HM 943 applications provides excellent opportunity to consolidate inventory. The Tribol HM 943 range is fully compatible with the elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers
Tribol HM 943 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HMTribol HM 943 grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) 35VQ 25, I-286-S & M-2950-S
General Motors: LS2
Bosch Rexroth RE90220
Le Norse 100-1
Jeffrey No. 87
B.F. Goodrich 0152
The base oils in Tribol HM 943 are selected for chemical and thermal stability. They are also selected for the naturally high film strength necessary to prevent rupture at the highest pump pressures and tightest clearances where operating conditions usually lead to mixed or boundary (contact) lubrication. The premium base oils also maintain unsurpassed cleanliness, therefore minimizing formation of varnish deposits and wear debris in any system. The anti-wear characteristics of Tribol HM 943 oils are achieved by a unique additive system which does not include zinc. The advanced anti-wear additive systems maintain critical dimensions in robots and other NC machines, therefore extending the service life of valves, pumps, gears, and bearings. The unsurpassed oxidation stability of Tribol HM 943 oils is a result of extensive research to stabilize petroleum oils at high operating temperatures. The balanced, total additive system in Tribol HM 943 oils also inhibits foaming and provides an unusual degree of corrosion protection see Typical Characteristics.
California Prop. 65 WARNING: This product can expose you to Ethylene oxide, which is known to the State of California to cause cancerand birth defects or other reproductive harm. This product can expose you to chemicals including 1,4-Dioxane,Propylene oxide, Ethyl acrylate, which are known to the State of California to cause cancer, and Methanol, which isknown to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov