Product Description
GENERAL INFORMATION
ANDEROL 555 is an ISO 100 diester based synthetic compressor lubricant specifically designed to provide long term lubrication in process gas compressors.
APPLICATIONS
For cylinder and frame lubrication of reciprocating compressors and vacuum pumps using the following gases:
Air Carbon Dioxide (dry) Hydrogen Sulphide (dry) Propane
Butadiene Ethylene Natural Gas Synthesis Gas
Carbon Monoxide Helium Methane Sulphur Hexafluoride
Furnace (crack) Gas Hydrogen Nitrogen
Nominal Operating Range is –15°C to 230°C (5°F to 445°F)
APPROVALS
ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 20 years of successful performance. They are field tested, approved or recommended by most major compressor manufacturers. Should you have any questions regarding the suitability of ANDEROL 555 compressor lubricant for a specific manufacturer's model compressor, please check with your ANDEROL lubricant supplier or contact Anderol Inc.
ADVANTAGES
• No metallic additives to interfere with catalytic processes
• Fewer oil changes
• Lower oil consumption
• Reduces compressor maintenance
• Eliminates lacquering and deposits
• Greatly reduces fire and explosion hazard
• Reduces energy consumption
• Separates water condensate rapidly
COMPATIBILITY
The following seals, paints, and plastics are recommended for use in contact with Anderol Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials, see our "Compatibility Guide."
RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, and PBT.
NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, and ABS.
