The Castrol Aircol SR compressor oil range of premium lubricants are designed for use in rotary screw compressors and are based on polyalphaolefin (PAO) fluids.
Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (> 100 °C) are experienced. These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100 °C, as defined by ISO 6743-3:2003.For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours. Aircol SR range is fully compatible with nitrile, silicone, polyurethane and fluropolymer seal materials typically used in compressor units. It is not compatible with butadiene styrene (SBR) or ethylene propylene (EPDM) seals. Aircol SR is classified as follows: DIN 51506 classification - VDLISO 6743/3 - DAG, DAH and DAJ for rotary air compressors Aircol SR grades meet the requirements of: Atlas Copco 8000 hour oil drain interval Kaeser.
California Prop. 65 WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.