Product Description
INTRODUCTION
Petro-Canada’s TRAXON E SYNTHETIC line of lubricants are formulated to meet the “Genuine Roadranger” extended drain and warranty performance requirements set by Eaton Corporation (for transmissions) and Dana CVSD Corporation (for hypoid gears/axles).
TRAXON E SYNTHETIC 75W-90 and 80W-140 are heavy duty, extreme pressure, GL-5 gear lubricants recommended for use in:
• Manual transmissions requiring EP-type oils
• Transfer cases for heavy equipment, trucks and tractors where hypoid gears and axles are used
TRAXON E SYNTHETIC MTF is a synthetic transmission lubricant recommended for use in:
• Heavy duty manual transmissions requiring non-EP oil and where API GL-5 performance is not required or desired
• Severe service conditions
• Extended drain applications
FEATURES AND BENEFITS
TRAXON E SYNTHETIC 75W-90 and 80W-140 These hypoid gear/axle fluids feature a high viscosity index and very low pour point, and contain extreme pressure additives. They are specially formulated to operate under a variety of load conditions and protect hypoid gears and bearings against rust, corrosion and oxidation.
Fuel Economy
• TRAXON E SYNTHETIC 75W-90 has demonstrated up to 1.5%* fuel efficiency benefits over the previous formulation
Long Life
• Extremely high film strength, shear stability and proven anti-rust and anti-corrosion properties protects equipment longer providing reduced maintenance costs
• Exceptional resistance to oxidation provides long lubricant life, thus extending drain intervals between change-outs for maximized oil life and less downtime
All-Season Protection
• High viscosity indices and good low temperature flow properties provide excellent protection over a wide range of temperatures for increased productivity
• Easier manual transmission shifting in sub-zero temperatures for those transmission systems that allow EP oils
• Easier hypoid gear movement under low temperature conditions for better efficiency and less viscous drag versus conventional grades
APPLICATIONS
TRAXON E SYNTHETIC 75W-90 and 80W-140 These products are recommended where heat and wear present major problems. These applications include:
• Manual transmissions where EP type lubricants are recommended by the manufacturer
• Transfer cases for heavy equipment trucks, tractors and industrial axles, hypoid gears and gear drives
• Light and heavy duty trucks and mining, forestry and farm machinery
Both products meet or exceed the performance requirements for:
• API Service Classifications GL-5 and MT-1
• MIL-L-2105D / MIL-PRF-2105E / SAE J2360
• Dana CVSD SHAES 256 Rev E (75W-90 only) and SHAES 429 Rev A.
• DANA CVSD SHAES Approved Lubricant Suppliers Listing - pending approval
• Approved for Roadranger 750,000 mile extended warranty programs with 500,000 mile drain intervals (see Eaton’s TCMT0020 - Lubrication Guide (Recommended Lubricant Suppliers)
• International TMS 6816 (obsolete)
• Navistar MPAPS B-6821
In addition, these products meet or exceed:
75W-90
• Meritor 0-76-N (TP-9539 extended drain listing) - approval pending
• Mack GO-J Plus (approval pending)
• Detroit Diesel DF93K219.01
