Product Description
Castrol Molub-Alloy MWO 50 A LP Lubricant is a high performance slide and way lubricant. The MWO 50 A LP was
developed specifically to lubricate the rails of travelling pallets and the ways of work stations in automatic transfer
machines used in high precision, high volume manufacturing.
Automatic transfer machines have been widely adopted by the automotive industry for machining automatic
transmission housings and similar components.
Demands for increased production have led to the design of higher and higher speed automatic transfer machines.
Increased operating speeds have also spawned new metal cutting fluids and coolants which are highly surface active to
increase the speed of tool wetting and the removal of heat.
The surfactant additives used in these modern coolants have a detergent and cleansing action on oil and can rapidly
displace lubricants used to protect the pallet guide rails and the ways at work stations.
The special formulation of Molub-Alloy MWO 50 A LP Lubricant resists the cleansing action of surface-active coolants
so that wear on the rails and way is minimized, and motion is smooth and accurate.
With the Molub-Alloy MWO 50 A LP Lubricant, positive lubrication can be achieved to control wear and promote
machining accuracy without excessive reapplication or high lubricant consumption.
Molub-Alloy MWO 50 A LP Lubricant is part of Castrol Performance Lubricants Eco-Solution product offering.
Formulated to address environmental concerns, they are free of lead, chlorinated solvents, and barium. They contain
less than 2 ppm of phenol.
The base oils in MWO 50 A LP Lubricant is of the highest quality and is selected for its ability to sustain a lubricating
film despite sudden changes in load or shearing forces. The formulation includes select polymer additives for both
adhesive and cohesive characteristics.
A select blend of Molub-Alloy lubricating solids is uniformly dispersed throughout the oil in a very stable suspension.
Under the extreme operating conditions, the lubricating solids provide positive lubrication even when the film is reduced
to minimum thickness or where boundary conditions prevail. The value of the lubricating solids is reflected in the
antiwear performance of the oils.
A carefully balanced treat rate of rust and oxidation inhibitors offers maximum rust protection for parts and long service
life from the oil. Molub-Alloy MWO 50 A LP Lubricant is not corrosive to ferrous or nonferrous metals
Application
