Product Description
GENERAL INFORMATION
ANDEROL 500 is an ISO 100 diester-based lubricant designed to provide high temperature and long-term lubrication with minimal deposit formation.
ANDEROL 500 is rated H2 for use in food processing plant applications
APPLICATIONS
Cylinder and crankcase lubrication for reciprocating compressors and vacuum pumps for the following gases:
Air Butadiene Carbon Dioxide (dry) Carbon Monoxide
Ethylene Furnace (crack) Gas Helium Hydrogen
Hydrogen Sulphide (dry) Methane Natural Gas Nitrogen
Propane Synthesis Gas Sulphur Hexafluoride
ADVANTAGES
- Fewer oil changes
- Lower oil consumption
- Reduces compressor maintenance
- Eliminates lacquering and deposits
- Greatly reduces fire and explosion hazard
- Reduces energy consumption
- Separates water condensate rapidly
APPROVALS
ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 30 years of successful performance. They are field tested, approved or recommended by major compressor manufacturers. Should you have any questions regarding the suitability of ANDEROL® 500 compressor lubricant for a specific manufacturer's model compressor, please check with your ANDEROL lubricant supplier or contact Anderol Company.
COMPATIBILITY
The following seals, paints, and plastics are recommended for use in contact with Anderol Company Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials, see our "Compatibility Guide."
RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, ABS
